User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- 1.1 AC Input
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- 1.2 12.5VDC Input
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.3 24VDC Input
- Transmit Power and Current Consumption - 24VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.4 48VDC Input
- Transmit Power and Current Consumption - 48VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.5 Miscellaneous
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual Reciter Specifications 29
© Tait Electronics Limited October 2004
Compliance Standards
Where applicable, this equipment has been tested and approved to the following standards.
RF EN 300 086-2:V1.2.1
EN 300 113-2 (03/2001)
AS4295-1995
CFR 47 Parts 15, 22 and 90
RSS-119 Iss 6
HKTA 1002*
TS 101*
*H band only
EMC ETSI EN 301 489 V1.4.1 (2002-08)
CFR 47 Part 15 Level B1
Safety BS EN 60950-1:2002
ANSI/UL Std. 60950 3rd edition
CAN/CSA-C22.2 No. 60950-00 3rd edition
AS/NZS 60950 and ACATS001
Environmental
Low Pressure (Altitude)
Humidity
Vibration
Shock
MIL-STD-810F 500.4 Proc 2
IEC60068-2-30
MIL-STD-810F 514.5 Proc 1
MIL-STD-810F 516.5 Proc 1