User's Manual
Table Of Contents
- Specifications Manual
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- 1.1 AC Input
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- 1.2 12.5VDC Input
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.3 24VDC Input
- Transmit Power and Current Consumption - 24VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.4 48VDC Input
- Transmit Power and Current Consumption - 48VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- 1.5 Miscellaneous
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
28 Reciter Specifications TB8100 Specifications Manual
© Tait Electronics Limited October 2004
Above Limiting Response within +1, –2dB of a flat response (ref. 1kHz)
Distortion <2%
Hum and Noise
Narrow Bandwidth
Mid Bandwidth**
Wide Bandwidth
**H band only
–50dB typical (ETSI)*
–50dB typical (ETSI)*
–55dB typical, 300Hz to 3kHz (ANSI/TIA)*
*up to 5dB degradation at extremes of switching range and
temperature
Exciter Audio Section - Modulation Characteristics (Continued)
Exciter Audio Section - CTCSS
Standard Tones all 37 ANSI/TIA group A, B and C tones plus 13
commonly used tones
Frequency Error*
*from ANSI/TIA tones
0.08% maximum
Generated Tone Distortion 1.2% maximum
Generated Tone Flatness flat across 67Hz to 250.3Hz to within 1dB
Modulation Level adjustable
Modulated Distortion <5%
External Reference Input
Frequencies*
*One frequency must be specified by the Service Kit.
10MHz or 12.8MHz
Lock Range ±50Hz
Input Level 300mVpp to 5Vpp
Input Impedance ≥1kΩ