User's Manual

14 Description TB8100 Installation and Operation Manual
© Tait Electronics Ltd June 2003
Figure 1.3 above shows the configuration for a typical single 100W base
station. The PMU occupies its normal slot at the left end of the subrack,
with the PA directly beside it. The single reciter occupies the slot
immediately to the right of the PA.
Unlike the 5 and 50W PAs, the 100W PA is mounted horizontally with the
heatsink facing upwards. It is also fitted with an airflow duct to channel the
airflow from the cooling fan through the heatsink fins.
Figure 1.3 Mechanical Assembly - Single 100W Base Station
b
PMU
f
module retaining clamp
c
PA
g
plastic guide rail
d
airflow duct
h
subrack
e
reciter
i
cable retaining clip
b
c
d
e
f
g
h
i