User's Manual

28 Operating Controls TB8100 Installation and Operation Manual
© Tait Electronics Ltd June 2003
Indicator LEDs
These LEDs provide the following information about the state of the reciter:
■ steady green - the reciter is powered up
■ flashing red - one or more alarms have been generated; you can use the
Service Kit software to find out more details about the alarms.
3.3 PA
The only controls on the PA are the indicator LEDs visible through a slot in
the front panel.
Indicator LEDs These LEDs provide the following information about the state of the PA:
■ steady green - the PA is powered up
■ flashing green - the PA has no application firmware loaded; you can use
the Service Kit software to download the firmware
■ flashing red - one or more alarms have been generated; you can use the
Service Kit software to find out more details about the alarms.
3.4 PMU
The only controls on the PMU are the on/off switches on the rear panel for
the AC and DC modules, and the indicator LEDs visible through a slot in
the front panel.
Figure 3.3 Operating Controls on the PA
b
indicator LEDs
b
5/50W PA
100W PA