User's Manual

TB8100 Installation and Operation Manual Installation 39
© Tait Electronics Ltd June 2003
3. Rotate the carton carefully onto its side e, and then onto its bottom
f, ensuring that none of the flaps is trapped underneath.
4. Slide the carton upwards over the foam cushions and lift it away
g.
5. Remove the cushion from the top of the BSS
h and then lift the BSS
out of the other cushion
i.
Disposal of
Packaging
If you do not need to keep the packaging, we recommend that you recycle
it according to your local recycling methods. The foam cushions are CFC-
and HCFC-free and may be burnt in a suitable waste-to-energy combustion
facility, or compacted in landfill.
Mounting the Subrack
Caution We recommend that you remove the modules from
the subrack before lifting it (refer to “Replacing
Modules” on page 43), or have another person help
you with the lifting.
Figure 4.4 Subrack Mounting Points
b
main mounting holes - front
c
auxiliary mounting holes - rear
front view
rear view
b
c