User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
TB8100 Specifications Manual Reciter Specifications 19
© Tait Electronics Ltd June 2004
Receiver Audio Section - General
Outputs Available speaker output via control panel
balanced and unbalanced line outputs via system
interface PCB
Frequency Response flat or de-emphasised (750µs)
De-emphasised Response
Bandwidth
Response
300Hz to 2.55kHz (NB)
300Hz to 3.4kHz (MB)*
300Hz to 3.4kHz (WB)
within +1, –3dB of a –6dB/octave de-emphasis curve
(ref. 1kHz)
*H band only
Flat Response
Bandwidth
Response
*H band only
Balanced Line Output
(via System Interface PCB)
Output Level Range
Output Impedance
Distortion*
De-emphasised
Flat
*at –70dBm signal level
–20dBm to +10dBm
600Ω
≤2%
≤4% (NB)
≤2% (WB)
Unbalanced Line Output
(via System Interface PCB)
Output Level Range 0.3Vpp to 3Vpp into 10kΩ
Speaker Output
(via Control Panel)
Power
Speaker Impedance
Distortion*
*at –70dBm signal level, de-emphasis selected
0.5W maximum
16Ω nominal
≤3% at 1kHz, 0.35W, 16Ω
Balanced Audio Unbalanced Audio
67Hz to 2.55kHz (NB)
67Hz to 3.4kHz (MB)*
67Hz to 3.4kHz (WB)
within +1, –3dB of
output level at 1kHz
10Hz to 2.55kHz (NB)
10Hz to 3.4kHz (MB)*
10Hz to 3.4kHz (WB)
within +1, –1dB of
output level at 1kHz