User's Manual
Table Of Contents
- Tait Contact Information
- Contents
- Preface
- 1 System Specifications
- Transmit Power and Current Consumption - 240VAC Input
- Transmit Power and Current Consumption - 110VAC Input
- Transmit Power and Current Consumption - AC Input Voltage Extremes
- Transmit Power and Current Consumption - 12.5VDC Input
- Transmit Power and Current Consumption - DC Input Voltage Extremes
- Receive Power and Current Consumption
- Dimensions and Weight
- Isolation
- 2 Reciter Specifications
- General
- Receiver RF Section
- Receiver Audio Section - General
- Receiver Audio Section - CTCSS
- Receiver Audio Section - Gating Operation
- Exciter RF Section
- Exciter Audio Section - Inputs
- Exciter Audio Section - Modulation Characteristics
- Exciter Audio Section - CTCSS
- External Reference Input
- Compliance Standards
- 3 Power Amplifier and Transmitter Specifications
- 4 Power Management Unit Specifications
14 Reciter Specifications TB8100 Specifications Manual
© Tait Electronics Ltd June 2004
Identifying the
Reciter
You can identify the model and hardware configuration of a reciter by
referring to the product code printed on a label on the rear panel. The
meaning of each character in the product code is explained in the table
below.
Note This explanation of reciter product codes is not intended to sug-
gest that any combination of features is necessarily available in any
one reciter. Consult your nearest Tait Dealer or Customer Service
Organisation for more information regarding the availability of
specific models and options.
Product Code Description
TBAX
XXX-XXXX 4 = reciter
TBA4XXX-XXXX 0 = default
TBA4XXX-XXXX Frequency Band and Sub-band
B2 = 136MHz to 156MHz
B3 = 148MHz to 174MHz
H1 = 400MHz to 440MHz
H2 = 440MHz to 480MHz
H3 = 470MHz to 520MHz
TBA4XXX-XXX
X System Interface PCB
000 = no system interface PCB fitted
0A0 = standard
0B0 = isolated
0C0 = isolated E & M
0T1 = TaitNet
TBA4XXX-XXXX 0 = default
H4 = 380MHz to 420MHz