Service Manual Part 5


-.) +
  
+ ;?
The T2000-34 kit provides selective tone calling (Selcall) facilities for T2010 and T2015
model T2000 Series II radios.
The Selcall kit consists of a small module and a 5MHz crystal that are fitted to the
radio’s logic PCB. This option allows selective individual or group calls within a fleet of
radios, on channels that have Selcall programmed. Selcall parameters and features are
set up and enabled during programming. Both Sigtec and International group formats
are supported by the T2000-34 PCB.
Refer to Section 8.7.3, “Programming” for a list of user-selected features. The following
topics are covered in this Section:
Section Title Page
8.7.1 Components Required 8.7.2
8.7.2 Fitting 8.7.2
8.7.3 Programming 8.7.3