Service Manual Part 5



&'() 

  

 ; )8?

The T2000-05 remote speaker kit provides a 4Ω external speaker for T2010, T2015 and

T2030 models.

 !)6(

The T2000-05 kit contains the following components:

 .



1 Choose a suitable mounting position for the speaker.

With the speaker fitted to the mounting bracket, check that it does not interfere

with the operation of any of the vehicle controls.

2 Fix the speaker mounting bracket securely in the chosen location with suitable fas-

teners. Two M4 self tapping screws and ‘U’ type captive nuts have been supplied

for this purpose.

 Check before drilling that the drill will not damage any components or

wiring behind the panel.

a If drilling directly into metal, drill two 3.5mm holes in the appropriate locations

and secure the bracket with the supplied M4 self tapping screws.

b If mounting the bracket to any other material, such as plastic, drill two 4.5mm

holes and attach the bracket with the M4 screws and captive nuts. Slide a captive

nut over the edge of the panel to align with each hole, ensuring that the screw will

pass through the larger hole to thread into the smaller hole.

c If neither of the above methods is appropriate, M4 screws, nuts and shakeproof

washers are equally suitable.

3 Attach the speaker to the mounting bracket with the thumbscrews.

Quantity Description

1 T2000 speaker complete with mounting bracket and thumb screws

2 M4 self tapping screws

2 ‘U’ type captive nuts for self tapping screws

5m speaker wire complete with receptacles and speaker socket