Service Manual Part 5

  !"#$% 
  
 !)6(
To convert a T2000-500 and T2000-600 to low power, the following components are
required:
 .
&

1 Refer to Figure 8.3.1.
Remove L315, L316, L317 and *R319 from the top side of the PA.
Crush and remove the ferrite bead which forms part of L314, so that only the wire
link remains.
   !" #   $ %
Description IPN Quantity
Low Power
Common Parts
56
Ω
SRF16 resistor
030-02560-20 2
T2000-500/600 replacement transistor PCB 220-01287-00 1
radio type label - 1
appropriate type approval label - 1
T2000-500 Low
Power Parts
5p6 NP0 500V GRM42-2 chip capacitor 015-01560-06 2
22p NP0 500V GRM42-2 chip capacitor 015-02220-06 3
T2000-600 Low
Power Parts
4p7 NP0 500V GRM42-2 chip capacitor 015-01470-06 1
5p6 NP0 500V GRM42-2 chip capacitor 015-01560-06 1
18p NP0 500V GRM42-2 chip capacitor 015-02180-06 2
L315
*R319
*L316
L314
L317
*C330
*C331
*C332
C300
C346
Replacemen
t
zero Ω
resistor
Q308