User's Guide
Table Of Contents
- Contents
- For your safety
- Menu maps
- 1 About this guide
- 2 Before using your radio
- 3 Getting started
- 4 Basic operation
- 5 Operating in conventional mode
- Making a call
- Making an individual call
- Understanding talkgroups
- Making a local call
- Connecting to a telephone network
- Making an emergency call
- Sending a status message
- Receiving calls
- Communicating directly with other radios
- Checking that the channel is clear
- Using the radio in different repeater areas
- Hearing faint and noisy signals
- 6 Operating in P25 trunking mode
- 7 Scanning
- 8 P25 services
- 9 Location services
- 10 Emergency operation
- 11 Encryption
- 12 Customizing radio settings
- 13 Charging and caring for batteries
- 14 Troubleshooting
- 15 Glossary
- Simplified Declaration of Conformity
- Tait Software Licence Agreement
P25 services 105
The LED glows red and a message may be
displayed to advise you whether the status update
has been sent successfully or not.
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Status request
This feature is only available on P25 conventional
channels.
You can find out what another radio user is currently
doing by asking their radio to send you a status
update.
To send a status request:
1 Press Menu and select Services >
Status request.
2 Select the status request recipient from the list.
3 Press Send to.
A message showing the destination appears in the
display.
The LED glows red briefly. If the request was
successful, a message showing the status
appears in the display.
Status request
Car 2
Car 3
Send toCancel
Sending sts
rqst to
Car 2
Cancel
Status rx’d
At lunch Car 2
Cancel