_User_Manual_Taisync_Pro_V1.00(HDMI-AV-HDMI)-EN-20200519

5
Connect a 12V power source to this port. The power source can be from a battery, or can
be from a power adaptor when the ground unit is upgraded on the ground. The power
supply recommended 3s battery.
② AV Port
Connect the AV output of camera to the AV input of the air unit.
③ Serial Port (UART)
Connect this port to the telemetry port of a flight controller for telemetry communication
with the ground unit. UART singal: LVCMOS-3.3V.
④ Remote Control Port (RC)
Connect this port to the PPM/S.bus port of a flight controller for remote control
communication with the ground unit. Pin V + can provide 5V power supply.
⑤ Micro USB Port
Connect this port to the USB port of a PC or Laptop, and use the Taisync PC program to
upgrade firmware on the air unit.
① HDMI Port
Connect the HDMI output of a camera to the HDMI input of the air unit.
① LED 1
When this LED is on, it means that the air unit is connected to the camera of HDMI video
interface; when this LED is off, it means that the air unit is not connected to the camera of
HDMI video interface.
①
①
②
③
④
⑤