_User_Manual_Taisync_Pro_V1.00(HDMI-AV-HDMI)-EN-20200519

47
Q16: After connecting Taisync module, RC can not be connected properly?
Please follow the following steps:
1) Please check whether the link state is normal, please refer to Question 12 and Question
13 if it is abnormal.
2) Please check whether the RC port both the air and the ground units is correct.
3) Please check whether the RC connecting between flight controller and air unit is correct
and that between ground unit and remote contriller is correct.
4) If using PPM mode, check the mode configuration of the remote controller; if using S.
BUS mode, check the configuration of the receiver and remote controller;
5) Please check whether the RC connection of the air and ground unit is correct. We
provides standard cables. If you make it by yourself, please check the pin.
6) Please check whether the RC mode is configured correctly with Taiysnc PC management
software.
7) If the above steps can not solve the problem, please contact Taisync technical support
staff.
Q17: After connecting Taisync module, video can not be output properly?
Please follow the following steps:
1) Please check whether the link state is normal, please refer to Question 13 and Question
14 if it is abnormal.
2) Please check whether the HDMI cable and camera is normal;
3) Please check whether the phone or HDMI connection is correct, and whether Viulinx APP
is used;
4) If the above steps can not solve the problem, please contact Taisync technical support
staff.
Q18: After connecting Taisync module, what if the video carton or mosaic?
Please follow the following steps:
1) Please confirm whether the downlink mode configuration is reasonable;
2) Please check whether the HDMI connection of air unit cable is normal;
3) Whether the connection of HDMI or USB cable of ground unit is normal;
4) Please check If there is interference exsit, we can consider changing the working
frequency.
5) If there is no interference, whether the limit distance of communication link has been
reached;