Installation Guide

6
Install inner door panel by lifting up and into Top track.
STEP 12
Hook lip of bottom guide into slot in bottom track and screw it to inside door bottom using 3/8"
screws.
NOTE: This system works best if there is a small amount of play between the guide and panel.
We suggest that you tighten the screws down completely and then back them o 1/4 turn. Slide
the door panel from end to end of the track. If it feels loose and sloppy,tighten down a bit more.
If the panel does not slide smoothly along the entire track, back them o a bit more.
STEP 13
Caulk both sides of the shower door frame to
seal. Keep the entire area d for a minimum of
24 hours. Your installation is now complete.
FINAL STEP:
STEP 12
OUTER DOOR
INNER DOOR
INNER DOOR
STEP 13
SIDE VIEW SIDE VIEW
SIDE VIEW
CAULK ALL SIDES
Adjust
3/8" SCREW