Installation Guide

5
Run 1 1/2" screws through wall bumper and then drive it into center hole on each side.
STEP 8
Measure opening at top of wall jamb , cut Top track (pa①) 1/16" shoer than opening.
STEP 9
Place Top track down over wall jambs as shown.
STEP 10
Install outer door panel by lifting up & into Top track.
STEP 11
STEP 9
STEP 8
STEP 10
STEP 11
OUTER DOOR
SIDE VIEW
SIDE VIEW
SIDE VIEW
1 1/2" SCREW
L=actual openimg - 1/16"