Installation Guide
4
Repeat step 3 on the other side.
STEP 4
Run a thin bead of silicone caulk down the entire length of both bottom ledges on the bottom
track. Place the bottom track into position and press down rmly along the length of the track.
STEP 5
Push wall plugs into holes drilled in step 3 and tap them in with a rubber mallet.
NOTE: If you are installing on berglass or aclic, skip this step and discard the wall plugs.
STEP 6
Run a thin bead of silicone caulk down the entire length of both bottom ledges on the wall jamb.
STEP 7
STEP 5/6/7
TOP VIEW