Instructions / Assembly

5
Use 1 1/2" screws to anchor wall bumper and bumper guide into center hole on each side.
STEP 8
Measure opening at top of wall jamb, cut Top track (pa①) 1/16" shoer than opening.
STEP 9
Place Top track down over wall jambs as shown.
STEP 10
Install outer Door panel by lifting up & into Top track (pa①) ( Do not lift by towel bar, be
careful not to bump panel against metal track.)
STEP 11
STEP 9
STEP 8
STEP 10
STEP 11
SIDE VIEW
SIDE VIEW
1 1/2" SCREW
L=actual openimg - 1/16"