Instructions / Assembly

4
Repeat step 3 on the other side.
STEP 4
Run a thin bead of silicone caulk down the entire length of both bottom ledges on the bottom
track. Place the bottom track into position and press down rmly along the length of the track.
STEP 5
Push wall plugs into holes drilled in step 3 and tap them in with a rubber mallet.
STEP 6
Caulk a thin bead of silicone on the entire bottom ledges of the wall jamb.
STEP 7
NOTE: If you are installing on berglass or aclic, skip this step and discard the wall plugs.
STEP 5/6/7
TOP VIEW