User's Manual

10
1. Low Battery Indicator
Red light appears when power is insufcient to the oximeter.
2. SpO
2
Indicator
Red light appears when probe disconnects from oximeter. Green light appears
when nger insert probe sensor from oximeter.
3. Set Button
Is used to set up settings.
4. Advance Button (Bluetooth Key)
Is used to review status. For Bluetooth transmission, press and hold the Advance
Button (Bluetooth key) for 3 seconds to enter pairing mode.
5. On/Off Button
Is used to turn on or turn off the oximeter by pressing On/Off button.
6. SpO
2
%
The measurement result of oxygen saturation in percentage.
7. Pulse Rate
The measurement result of pulse rate.
8. Pulse Amplitude
The strength of the signal is detected by the oximeter.
9. LED Screen
Display measurement results.
10. Oximeter Sensor Port
Connect the probe and the oximeter.
11. Bluetooth Indicator (for TD-8201B only)
Blue light appears when turn on bluetooth.
12. Alarm Indicator
Red light appears when oxygen saturation value upper or below the setting ranges.