User Manual

Reviewing Blood Glucose Day Average Results
1. Press and release Main Button.

When appears on the display, keep pressing Main Button for 3 seconds
until the flashing “ ” appears. Release Main Button and then your 7-day
average result measured in general mode will appear on the display.
(58 mg/dL = 3.2 mmol/L)
2. Press Main Button to review 14-, 21-, 28-, 60- and 90- day average
results stored in each measuring mode in the order of Gen, AC, then PC.
3. Exit the meter memory.
Keep pressing Main Button and the meter will turn off after displaying the last
test result.
NOTE:
 Any time you wish to exit the memory, keep pressing Main Button for 5
seconds or leave it without any action for 3 minutes. The meter will switch
off automatically.
 Control solution results are NOT included in the day average.
 If using the meter for the first time, “---“ displays when you recall the test
results or review the average result. It indicates that there is no test result
in the memory.