Manualshelf

User Manual

ManualsBrandsTAIDOC TECHNOLOGY ManualsGlucose MonitorsBlood Glucose Monitoring System
11121314151617181920
4. Apply the Sample
Gently apply the drop of blood to the absorbent hole of the test strip at a titled
angle. Confirmation window should be completely filled if enough blood
sample has been applied. Do NOT remove your finger until you hear a beep
sound.
NOTE:
Do not press the punctured site against the test strip or try to smear the
blood.
If you do not apply a blood sample to the test strip within 3 minutes, the
meter will automatically turn off. You must remove and reinsert the test strip
to start a new test.
The confirmation window should be filled with blood before the meter
begins to count down. NEVER try to add more blood to the test strip after
the drop of blood has moved away. Discard the used test strip and
retest with a new one.
If you have trouble filling the confirmation window, please contact your
healthcare professional or the local customer service for assistance.
5. Read Your Result
The result of your blood glucose test will appear after the meter counts down
to 0. Blood glucose test results will automatically be stored in the memory.
(100 mg/dL = 5.5mmol/L)