User Manual

Performing a blood glucose test
You will need:
1. Meter 2. Test Strip 3. Lancing Device 4. Lancet



1. Insert the test strip to turn on the meter
Wait for the meter to display the “
” .




2. Select the appropriate measuring mode by pressing M.
For selecting the measurement mode, please refer to the “FOUR
MEASURING MODES” section.

3. Obtaining a blood sample
Use the pre-set lancing device to puncture the desired
site. Wipe off the first appeared drop of blood with a
clean cotton swab. The size of the drop should be at
least as big as˙(actual size), which is 0.5 microliter (μL)
of volume. After penetration, discard the first drop of
blood with a clean cotton swab. Gently squeeze the
punctured area to obtain another drop of blood. Be
careful NOT to smear the blood sample.
