User Manual
4. Deleting the memory
With “dEL” and a flashing “no” symbol on the display, press SET to keep the
results in memory.
To delete all the results, press Main Button with a flashing ”yes” symbol on
the display, press SET to delete all the results and “‐‐‐“willbedisplayed.
5. Setting the reminder alarm
You may set up any or all of the reminder alarms (1-4). The meter displays
“On” or “OFF” and , press Main Button to turn on or turn off to set the first
reminder alarm.
Press Main Button to select “On”, then press SET to set the hour. When the
hour is flashing, press Main Button to add an hour. Press SET to confirm and
go to minutes, press Main Button to add one minute. Hold Main Button
longer to add faster. Press SET to confirm and go to the next alarm setting.
If you do not want to set an alarm, press SET to skip this step.
If you want to turn off an alarm, find the alarm number by pressing SET in the
setting mode, press Main Button to change from “ON” to “OFF”.
At the time of your alarm, the meter will beep and automatically turn on. You
can press Main Button to silence the alarm and insert a test strip to begin
testing. If you do not press Main Button, the meter will beep for 2 minutes
then switch off. If you do not want to test at this time, press Main Button to
switch off the meter.