User's Manual

A1-42

 Take a Reading

Read "Suggestions before Measuring" and "Applying the Pressure Cuff"

before you take a reading. Always apply the pressure cuff before turning

on the monitor.

STEP 1. Press the On/Off button. All the LCD symbols will appear.

Press the user selection button to select user (numbers from1 to

4) whose test reading will be stored in its memory. Then the cuff will begin to

inflate automatically.

STEP 2. After the cuff pressure is reached, the cuff begins

deflation. The pulse symbol “ ” will flash when pulse is

detected.

STEP 3. After the measurement, the monitor displays

the systolic pressure, diastolic pressure, and pulse rate.

STEP 4. Press the On/Off button to switch off. Or it will

switch off automatically after 3 minutes.