User's Manual

A1-23

 Setting the Monitor

Time, date, units of measurement, memory deletion, volume and language can

be set in the monitor. Two keys are involved: S button and M button.

Step 1 Press the S

button to start setting.

Step 2 Year will flash first.

Step 3 Press M button

to make changes.

Press S button to

advance to next setting.

Step 4 Date will

flash. Follow Step 3

for changes.

Step 5 Time will flash.

Follow Step 3 for changes.

Step 6 12H/24H mode

selection. Follow Step 3

for changes.

Step 7 Unit of glucose

concentration

will flash.

Follow Step 3 for changes.

*Please note: The default unit is

milligram per deciliter (mg/dL).

Step 8 Unit of blood

pressure will flash.

Follow Step 3 for changes.

*Please note: The default unit is

mmHg.

Step 9 Unit of temperature

will flash. Follow Step 3 for

changes.

Step 10 Voice volume

will flash. Follow Step 3

for changes.

Step 11 Auto send will flash. Follow Step 3 for changes.

Step 12 “dEL” and flashing “ “ will display on the screen for memory deletion.

 If you do not want to delete memory, press S button to skip this step.

 If you’d like to delete memory, press M button again

so that “ ” will start flashing. Press M button again

to delete ALL memory. The monitor will repeat all

the settings you just finished and then the monitor

will turn off.