Owner's Manual
46
Using AC Adapter
► Connect AC adapter to the monitor.
► Remove AC adapter from the monitor.
Step 1
Connect AC adapter plug to AC adapter
jack of the monitor.
Step 2
Plug AC adapter power plug into an
electrical outlet. The monitor is ready for
use.
Step 1
When the monitor is off, remove AC
adapter power plug from the electrical
outlet.
Step 2
Disconnect AC adapter plug from AC
adapter jack of the monitor.
NOTE
• If the power indicator is blinking in red when connecting AC adapter to a
power source, this indicates the monitor is in a pre-charging stage. Do not
remove AC adapter power plug. The recharge will begin shortly.
• If the battery is full-recharged but the power is getting low soon after use,
please contact local customer service for assistance.