Owner's Manual
35
Always apply the pressure cuff before turning on the monitor.
Auto Cycle Mode
Step 1
Press
to enter cycle mode. The monitor will automatically take
blood pressure measurement in 2 minutes for rst measurement.
The CYC On will show on the display and keep still until the remaining
time is in 1 minute. The number on the right represents the remaining
seconds countdown from 59 between each measurement.
Step 2
The cuff will begin to inate automatically. After the rst measurement
is complete, the monitor will take measurement consecutively in the
selected time intervals for up to 5 hours.
Step 3
After taken three measurements, the
results are averaged to produce the blood
pressure measurement. Press
to turn off
the monitor.