Owner's Manual
34
Always apply the pressure cuff before turning on the monitor.
Average Mode Measurement
Step 2
After the rst measurement is complete, the monitor will start
counting down before the second measurement begins. The
number on the right represents the remaining countdown between
each measurement. The monitor will take three (3) measurements
consecutively with an interval of 20 seconds.
Step 1
Press . The monitor will turn on and enter the averaging mode.
Then the cuff will begin to inate automatically.
NOTE
When the difference between the rst and second systolic pressure is more
than 15 mmHg, the time interval for third measurement will be 40 seconds.