Owner's Manual

29
NOTE
Do not press the punctured site against the test strip or try to smear the
blood.
If you do not apply a blood sample to the test strip within 3 minutes, the
monitor will automatically turn off. You must remove and reinsert the test
strip to start a new test.
The conrmation window should be lled with blood before the monitor
begins to count down. NEVER try to add more blood to the test strip after
your drop of blood has moved away. Discard the used test strip and retest
with a new one.
If you have trouble lling the conrmation window, please contact your
health care professional or the local customer service for assistance.
Step 5
Read Your Result
The result of your blood glucose test will appear
after the monitor counts down to 0. This blood
glucose result will automatically be stored in the
memory.
Step 6
Eject the used test strip and remove the lancet
To eject the test strip, point the strip at a disposal container for sharp
objects. The monitor will switch itself off automatically after the test
strip is ejected.
Always use caution when removing the lancet and follow the in-
structions in the lancing device insert when removing the lancet.
WARNING
The used lancet and test strip may be biohazards. Please discard them
carefully according to your local regulations.