Owner's Manual
28
Step 3
Obtaining a blood sample
Use the pre-set lancing device to puncture your de-
sired site. After penetration, discard the rst drop of
blood with a clean tissue or cotton. Gently squeeze
the punctured area to obtain another drop of blood.
Be careful NOT to smear the blood sample.
The volume of blood sample must be at least 0.5
microliter (μL) of volume. ( actual size).
Step 4
Apply the Sample
Gently apply the drop of blood to the absorbent hole of the test strip
at a tilted angle. Conrmation window should be completely lled if
enough blood sample has been applied. Do NOT remove your nger
until you hear a beep sound.