Owner's Manual
18
Step 7
Deleting the memory
While “dEL” and a ashing “ ” symbol appear on the display along
with user numbers, if you do not wish to delete the saved results,
press
to skip this step. If you wish to delete ALL the results, press
twice.
Step 8
Setting the cycle mode
Press
to choose the desired blood pressure cycle mode from the
following time interval selections: OFF, 5, 10, 15, 20, 30, 40 or 60
minutes. Press
to turn off the meter.
Congratulations! You have completed all settings!
NOTE
• These parameters can ONLY be changed in the setting mode.
• If the monitor is idle for 3 minutes during the setting mode, it will turn off
automatically.