User Manual

49
SPECIFICATIONS
 System Performance
Power source: Four 1.5V AA alkaline batteries
Size of monitor w/o cuff: 137mm (L) x 90 mm (W) x 54 mm (H)
Memory: 352 measurement results with date& time
Power saving: Automatic power off if idle for 3 minutes
System operating condition: 10℃-40 (50℃ -104℉), below 85% RH
System storage condition: 4 to 40 (39℃℃-104℉), below 85% RH
 Blood Glucose Measurement Performance
Measurement unit: mg/dL or mmol/L
Linear range: 20-600 mg/dL (1.1 -33.3 mmol/L)
Precision: ±5 % (CV)
Accuracy: ±15mg/dL when glucose <75mg/dL
±20% when glucose 75mg/dL≧
Ketone warning: glucose value is over 240 mg/dL
 Blood Pressure Measurement Performance
Pressure range: 0-300 mmHg
Heart rate range: 40-199 beat per minute
Measurement unit: mmHg or KPa
Accuracy of pressure: ±3mmHg or ±2% of reading
Accuracy of heart rate: ±4% of reading
Maximum inflation pressure: 300 mmHg
 Typ. RF Characteristics
Receive sensitivity: -90dBm
Max. Transmit power: 0dBm
Transmit power: 3.6V
Maximum input signal: -10dBm
RSSI range: -95 to -10dBm
RF Port impedance-SMA
Connector:
50 ohm
VSWR (max):
2:1
The device has been certified to meet the electrical and safety requirements of:
IEC 60601-1, EN 60601-1, IEC 61010-1, EN 61010-1, EN 61010-2-101, EN
60601-1-2, EN 61326
49