User Manual

HOW TO USE THE MEMORY FEATURES

 Viewing Memory in the Monitor

Your monitor stores the most 352 recent results of blood glucose and blood

pressure with date and time in its memory. You can review the test results in

memory with these easy steps.

STEP 1- When the monitor is off, press the M Button

once. You will see the average of the blood glucose

results (Fig. 46).

(Fig. 46)

STEP 2- Press the M Button again to recall the

readings measured previously. The other results will

be displayed in the order of time and date taken. You

will see the number of the result stored, followed by

the result (Fig. 47). When the memory is full, the

oldest results are deleted as new ones are added.

Note

1. When using the monitor for the first time, or when there are

no test results in memory, you will only see flashing “ ”.

This means that there are no test results in memory (Fig. 48).

2. The control solution results are NOT stored in the memory

(please also go to page 26 NOTE for information). The list of

past results are for blood glucose results and blood pressure

results and the result average are for blood glucose results.

(Fig. 48)

(Fig. 47)

STEP 3- Press the button to turn off the monitor and exit the memory mode.