User Manual

WARINING

It is extremely important that the cuff is at the same level of the heart. If the cuff

is relatively lower (higher) than the heart, the blood pressure measured will be

higher (lower) than the actual value. A 15 cm difference in height may result in

an error of 10 mmHg.

( Fig. 43)

(Fig. 44)

(Fig. 45)

NOTE

If you press the button during the measurement, the monitor will turn off.

STEP 6- All the LCD display symbols will

appear with a long “beep” sound (Fig. 43).

Then cuff begins to inflate automatically.

STEP 7- After the cuff pressure is reached,

the cuff begins to deflate. When detecting

pulse, the Pulse Symbol “ ” will flash,

along with a beeping sound during

measurement (Fig. 44).

STEP 8- After the measurement, the

monitor displays the systolic pressure,

diastolic pressure, and heart rate (Fig. 45).

Press the button to switch off. Or it will

switch off automatically after 3 minutes.