User Manual

38
 Testing Your Blood Pressure
(Fig. 40)
(Fig. 41)
( Fig. 42)
38
STEP 2- Connect the air plug of
the tubing to the air jack at the side
of the monitor (Fig. 39) .
SETP 1 Please sit and take a rest at least 10 minutes before measuring.
STEP 3- Assemble the cuff as Figure
40. The smooth cloth is on the inside
of the cuff loop and the metal D-ring
will not touch your skin (Fig. 40) ..
STEP 4- Hold your left arm in front of you
with your palm facing up. Slide the cuff
onto your left arm, above your elbow. The
red line on the edge of the cuff should be
approximately 0.8 to 1.2 inch (2 cm to 3
cm) above your elbow. Align the tubing
over the main arteries at the inside of your
arm (Fig. 41).
STEP 5-Place your elbow on a table or
other object.relax your hand with the plam
facing up.relax and make sure the cuff is
the same height as your heart.press the
button.remain still and do not talk or
move during the measurement (Fig 42).
(Fig.39)