User Manual

WASH AND DRY YOUR HANDS FIRST BEFORE STARTING.

( Fig. 27)

WARNING

To reduce the chance of infection:

 Never share a lancet with anyone.

 Always use a new, sterile lancet. Lancets are for single use only.

 Avoid getting lotion, oil, dirt, or debris in or on the lancets and the sampler.

(Fig.26)

STEP 1- Set the Lancing Device

Remove the cap of lancing device. Insert a

lancet into the lancet holder and push down

firmly until it is fully seated.(Fig.26)

Remove the protective disk.Replace the

lancing Device cap.( Fig. 27)

Replace the lancet device cap.Turn the cap

unit it is snug but not too tight.(Fig.28)

(Fig.28)

The adjustable tip offers 5 levers of skin

penetration. Twist the adjustable tip in either

direction until the number lines up with the

Arrow:

1-2 for soft or thin skin, 3 for average skin,

4-5 for thick or calloused skin. (Fig. 29)

(Fig.29)