User Manual

 Checking the Code

When you start measuring blood glucose, check the code number first.

If it does not match, please code the monitor as described in the previous

page.

CAUTION

If the code number displayed on the monitor does not match the number

printed on the vial, test results will be wrong.

(Fig. 17) (Fig. 18)

(Fig.19)

(Fig. 16)

STEP1- With the monitor off, insert a test strip into

the Test Slot. Make sure you insert the end with

the contact bars first and facing up. Contact bars

must be inserted all the way into the monitor for

an accurate result (Fig. 16).

STEP2- The monitor will display “CHK” and

the strip symbol (Fig. 17). Then the ambient

temperature will be shown (Fig. 18).

STEP3- Then the code number and flashing blood drop

appears. Check if the number shown on the monitor

matches the number on the test strip vial (Fig. 19). If it

matches, you can proceed with your test.