User Manual

 Coding the Monitor

You must code the monitor every time you begin to use a new vial of test strips.

Test results may be wrong if the code number displayed on the monitor does

not match the number printed on the strip vial.

Step 2- Remove the code strip, the LCD display will show

“OK”.

This tells you that the monitor has finished coding and is

ready for blood glucose testing.(Fig.15)

WARNING

It is important to make sure that the LCD displayed code is the same as the

code on the test strip vial before testing. Failure to do so will get wrong results.

Step 1- Insert the code strip when the

monitor is off. Wait until the code number

appears on the LCD display .(Fig.14)

Make sure the code number on LCD

display, on the code strip, and on strip

vial are identical.

(Fig. 14)

(Fig. 15)