User Manual

 Viewing Memory in the Monitor

Your monitor stores the most 352 recent results of blood glucose and pressure

with date and time in its memory. You can review the test results in memory

with these easy steps.

Step 1- When the monitor is off, press the M Button once. You

will see the average of the blood glucose results. (Fig. 31)

(Fig. 31)

Step 2- Press M Button again to recall the

readings measured previously. The other

results will be displayed in the order of time

and date taken. You will see the number of

the result stored, followed by the result. (Fig.

32) When the memory is full, the oldest

results are deleted as new ones are added.

Step 3- Press the

button to turn off the monitor and exit the memory mode,.

Using the monitor for the first time

When using the monitor for the first time, or when there are

no test results in memory, you will only see flashing “

”.

This means that there are no test results in memory. (Fig.

33)

(Fig. 33)

(Fig. 32)

HOW TO USE THE MEMORY FEATURES