User Manual

(Fig. 21)

(Fig. 22)

(Fig. 23)

 Taking a Reading

Step 1- Insert a test strip and check if the code number shown on LCD display

is the same as the code on the strip vial. If not, please refer to “Coding the

monitor”.

Step 2- Obtain a drop of blood as described in “Getting a Drop

of Blood”.

Step 3- When the “ “ symbol is flashing on the LCD display,

apply the drop of blood to the absorbent hole of the test strip.

(Fig. 21) Do not push your finger against the test strip or try to

apply a smeared sample.

Step 4- Make sure the blood sample completely

cover the confirmation window before moving

your finger away from the strip. (Fig 22) If the

confirmation window is not filled completely, do

not add more blood to the test strip. Discard the

test strip and retest.

Step 5- Read result after 10 seconds. (Fig 23) The test result

will be automatically stored in the monitor memory. Turn the

monitor off by removing the test strip.

HOW TO MEASURE BLOOD GLUCOSE