User Manual

 Getting a Drop of Blood

Be sure to read this section and the test strip package insert found in the test

strip box carefully before testing. Make sure you have all items needed to test:

monitor, test strips, lancing device, and sterile lancet.

Step 1- Insert a lancet in the adjustable lancing device.

(Fig. 15)

 Twist and remove the cap of lancing device.

 Insert a lancet into the lancet holder and push down firmly

until it is fully seated. (Fig. 15)

(Fig. 16)

 Twist the protective disk until it separates from the lancet.

(Fig. 16)

 Replace the lancing device cap until it is snug but not too

tight.

Step 2- Select the depth of puncture.

(Fig. 17)

 Twist the adjustable tip in either direction to select the

depth of puncture. (Fig. 17)

Five levels of depth were offered:

1-2 for soft or thin skin, 3 for average skin, and 4-5 for thick

or calloused skin. Please select the most suitable depth for

you to avoid unnecessary pain.

Step 3- Set the ejection control.

 Slide the ejection/cocking control back until it clicks. (Fig.

18)

If it does not click, the lancing device may have been cocked

when the lancet was inserted.

(Fig. 18)

HOW TO MEASURE BLOOD GLUCOSE