User Manual
Coding the Monitor
You must code the monitor every time you begin to use a new vial of test strips.
Test results may be inaccurate if the code number displayed on the monitor
does not match the number printed on the strip vial.
Step 1- Insert the check & code strip
when the monitor is off. Wait until the
code number appears on the LCD
display. (Fig 8)
Make sure the code number on LCD
display, on check & code strip, and
on strip vial are the same.
Step 2- Remove the check & code strip, the LCD display will
show “OK”. This tells you that the monitor has finished coding
and is ready for blood glucose testing.
22
(Fig. 8)
HOW TO MEASURE BLOOD GLUCOSE