User Manual

(Fig. 6)

 Setting the Monitor

Your monitor comes with the time, date, and units preset. These options may

be changed any time to fit your needs. They also need to be set again when

you change the batteries.

How to set the monitor?

Step 1- Start with the meter turned off.

Press the "S" button to enter the Setting Mode.

Step 2- Select and make changes.

Press the "S" button to select what you would like to change. The selected one

will be flashing. Press the "M" button to make the change.

Step 3- Save the Changes.

Press the "S" Button to save the changes you made and move on to next step.

Let’s see the year setting for example:

1. Press “S” button and the year will appear first, with the

number flashing. (Fig. 5)

2. Press and release the M button to advance one year.

To move the number faster, hold the M button down.

3. Press the Set button and the year will be set. At the same

time, the date will appear on the display with the month segment

flashing. (Fig. 6)

Set the month, day, hour, minute, and units in the same way.

(Fig. 5)

PREPARATIONS BEFORE USE