Owner's Manual

A2.1‐9of30
BLUETOOTH PAIRING
Please note that you must complete the pairing between meter and
Bluetooth receiver before transmitting data.
NOTE:
This step is recommended when the user needs to pair this meter to a
Bluetooth receiver for the first time, or when user needs to pair this meter to
another new Bluetooth receiver.
1. Installing the TDLink BP app
For more information, please refer to the section” HOW TO INSTALL AND
UPDATE THE TDLink BP”.
2. Connecting blood pressure meter with your mobile device
Turn on the Bluetooth on both your blood pressure meter and your mobile
device (iOS with 5.0.1 or higher and Android with 2.3.3 or higher). “PCL” will
appear on the meter display and the BT indicator will start to flash.
Your mobile device will now begin searching for the Bluetooth signal to pair
with.
Once the mobile device has found the blood pressure meter; the name of the
meter will appear on the pairing list. Please select and add to the list.
On the mobile phone, the blood pressure meter will be shown as a paired
device and on the blood pressure meter the Bluetooth Indicator LED will light
solid, indicating that the devices have been successfully paired.
3. Data transmission
The data transmission will begin spontaneously right after the measurement
when the Bluetooth is turn on.