Owner's Manual
A2.1‐13of30
HOW TO TEST YOUR BLOOD PRESSURE
Taking Measurement by the Device Itself
Always apply the pressure cuff before turning on the meter.
1. Press ON/OFF Button. All the LCD symbols will appear with a long
“beeping” sound. Then the cuff will begin to inflate automatically.
2. Pump starts to inflate and pressure in cuff increases to working pressure.
3. The heart symbol “ ” will show silently when pulse is detected during the
deflation. When signal of pulse becomes strong, “ ” icon starts to flash.
4. After the measurement, the meter displays the systolic pressure, diastolic
pressure and pulse rate.
5. Press ON/OFF Button to switch off. Or it will switch off automatically after
being idle for 3 minutes.
NOTE
If you press ON/OFF Button during measurement, the meter will be turned
off.