User Manual

WiFi Inventory Reader
6.2 Running Px Explorer
Before running Px Explorer, be sure that the WIFI Inventory Reader is powered up and correctly
engaged with the WIFI access point (or router) connected to the host system network.
Open the communication setting window (CRTL+C) and check that the media type is selected to
Ethernet/WIFI as shown below.
Enter the correct reader IP address.
Check the port number value and change it to the correct value in case the default raw TCP port
value of the WIFI Inventory Reader has been modified.
Set the STX setting mode to Fast to increase performances and click OK.
6.3 Reading and Writing a Tag
Px Explorer includes a Wizard function used to guide you each step of how to read or program a
tag. We recommend using the Wizard function for users who are not familiar with all Px Explorer
capabilities and features.
Click on the Wizard icon (magic wand) to open the Px Explorer Wizard dialog box.
30/36 Revision 1.1c June 2007