User's Manual

L-SA2 8-Book Library Stack Antenna User's Guide
8
/
22
Revision
1.3
MAY 2004
1 For Your Safety
1.1 General Use
The Textile Rental Stack Antenna is designed to be rugged and reliable and to provide years of
trouble-free service. Please observe the following general tips:
§ Take care not to scratch the device. Keep the device clean. When working with the device,
use only TAGSYS-approved accessories.
§ This device is not waterproof and should not be exposed to rain or moisture. Under extreme
conditions, water may enter the circuitry. In general, treat the device as you would a pocket
calculator or other small electronic instrument.
§ Take care not to drop the device or subject it to any strong impact. Do not carry the device
in your back pocket: if you sit on it, you may damage it.
§ Protect the device from extreme temperatures. For example, do not leave the device on the
dashboard of a car or truck on a hot day or on a day when temperatures are below
freezing, and keep it away from heaters and other heat sources.
§ Do not store or use the device in any location that is extremely dusty, damp, or wet.
§ Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
1.2 Care and Maintenance
This device is a product of superior design and should be handled with care. The suggestions
below will further increase the lifetime of this device.
§ Keep the device and all parts and accessories out of the reach of small children.
§ Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode
electronic circuits.
§ Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.
§ Do not store in hot areas. High temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
§ Do not store in cold areas. When the device warms up (to its normal temperature), moisture
can form inside the device, which may damage electronic circuit boards.
§ Do not attempt to open the device. Non-professional handling of the device may damage it.
§ Handle the device with care. Shocks may break internal circuit boards.
§ Do not clean the device with harsh chemicals, cleaning solvents or strong detergents.
Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water
solution.
§ Do not paint the device. Paint may clog the device’s moving parts and prevent proper
operation.