User Manual

Medio S004 EVM
7.3 Disabling Stand-alone Mode
The Medio S004 can be reset in Standard mode in one of two ways as described below:
• Use the S004 Explorer software provided with the reader and click Yes when the following
window is displayed
• Send the 'S' character using a console interface (for example, HyperTerminal).
• Unplug both power supply and USB cable. Change the Serial Communication Selector to
Synchronous mode. Plug both power supply and USB cables. Then revert to Asynchronous
mode if necessary by unplugging both power supply and USB cables and changing the
Serial Communication Selector again.
30/33 Revision 1.1 October 2006