User Manual

Medio S004 EVM
5.3 Plugging another antenna to the SMA connector
Other antennas may be plugged to the Medio S004 EVM antenna output using a MCB coaxial
cable.
The SMA connector may also be used to convert the MCB connector to a standard one, and plug a
SMA cable to another antenna. To do so, unplug the MCB cable from the A-VSA and connect it to
the SMA connector as shown below:
Depending on your local radio regulations, you will have to solder a SMA connector on the
dedicated footprint by yourself but this will void the TAGSYS certification.
Using another antenna will void any of the certifications (CE or FCC). You will have to certify
your final integrated system according to local radio regulations. To help you certify your final
integrated system, radio test report is included on the CDROM (“Medio S004 – Radio Test
Reports” folder)
October 2006 Revision 1.1 21/33