User Manual

Medio S004 EVM
5 Technical Information on the EVM
We recommend you to first read the Medio S004 Integrator’s Guide for details on the Medio
S004 reader.
5.1 Monitoring Medio S004 EVM Digital Signals
Signals sent to the Medio S004 can be monitored connecting probes (oscilloscope) to the
Monitoring Connector as described below:
Figure 2: Monitoring Connector
Pin
Pin Signal
1 GND
2 OUT
3 IN
4 RX
5 TX
6 CS
7 COMSELECT
DO NOT drive any signal with a digital level on this connector. The EVM may be damaged.
October 2006 Revision 1.1 19/33